
Product
TP1502-1
LCC SMD spread-spectrum module, 470–510 MHz, 17 dBm, -110 dBm sensitivity, 17.7 × 15.8 × 2.0 mm.
- Frequency
- 470–510 MHz
- TX power
- 17 dBm
- Sensitivity
- -110 dBm
- Package
- LCC SMD
Technical specifications
Radio
| Operating frequency | 470–510 MHz (configurable) |
|---|---|
| Transmit power | 17 dBm |
| Receiver sensitivity | -110 dBm |
| Modulation | S-FSK (spread-spectrum FSK) |
| Channel bandwidth | <200 kHz single carrier |
| Over-the-air data rate | 19.2 kbps/20 kbps |
| Antenna interface | LCC pad |
Hardware
| Supply voltage | 3.1 V – 3.6 V recommended 3.3 V |
|---|---|
| Interfaces | 1. AT UART, 9600 bps; 2. debug UART, 115200 bps; 3. network-status LED |
| Current consumption (typical) | Max TX current 95.5 [email protected] V; Max RX current 18.8 [email protected] V |
| Operating temperature | -40 °C to +85 °C |
| Storage temperature | -40 °C to +90 °C |
| Dimensions | 17.7(±0.15)mm × 15.8(±0.15)mm × 2.0(±0.2)mm |
| Pin count | 44 |
| Package | LCC SMD |
Overview
The TP1502-1 is a spread-spectrum FSK module on 470–510 MHz with 17 dBm output and -110 dBm sensitivity, supplied from 3.1–3.6 V with 3.3 V recommended.
It uses an LCC SMD package of 17.7 × 15.8 × 2.0 mm with 44 pins. Rates are 19.2 and 20 kbps; the AT UART runs at 9600 bps with a 115200 bps debug UART, and RI, wake-up, RST_OUT, LED and SWD are available.
Compared with TP1502 it trades a little sensitivity for a higher top rate, so it is the version to pick when the link is short and the update interval is tight.
