
Product
TP5301
TPUNB to RS485 transparent module, 470–510 MHz, 20 dBm, AC 220 V or DC 12 V variants, IP30 wall mount.
- Frequency
- 470–510 MHz
- TX power
- 20 ± 1 dBm
- Sensitivity
- -111 dBm @19.2 kbps, -107 dBm @76.8 kbps
- Package
- 79 × 54 × 30 mm
Technical specifications
Radio
| Operating frequency | 470–510 MHz |
|---|---|
| Channel bandwidth | ≤200 kHz per carrier |
| Symbol rate | 2.4 kbps / 19.2 kbps / 76.8 kbps |
| Transmit power | 20 ± 1 dBm |
| Channels | 1 |
| Receiver sensitivity | -111 dBm @19.2 kbps, -107 dBm @76.8 kbps (470 MHz) |
| Operating mode | Bidirectional transparent (no protocol encapsulation) |
Hardware
| Interfaces | RS485 ×1; TPUNB SMA female ×1; AC 220 V input (TP5301-AC) or DC 12 V input (TP5301-DC) |
|---|---|
| Supply voltage | DC 12 V ±10% (TP5301-DC); AC 220 V ±10% (TP5301-AC) |
| Power consumption | ≤0.5 W |
| Dimensions | 79 × 54 × 30 mm |
| Weight | <0.2 kg |
| Mounting | Wall mount |
| Protection class | IP30 |
| Installation | Indoor |
Environmental
| Operating temperature | -20 °C to +70 °C |
|---|---|
| Storage temperature | -40 °C to +85 °C |
| ESD immunity | Air discharge ±15 kV, contact discharge ±8 kV |
Overview
The TP5301 puts a TPUNB radio and an RS485 port in a 79 × 54 × 30 mm wall box. It is a pure transparent bridge — whatever arrives on RS485 leaves on the radio and the other way round, with no protocol wrapper to decode at either end. Transmit power is 20 ± 1 dBm, and sensitivity is -111 dBm at 19.2 kbps or -107 dBm at 76.8 kbps.
There are two power versions: TP5301-DC runs from 12 V DC ±10%, TP5301-AC takes 220 V AC ±10% directly, which is what makes it usable next to a meter box or a distribution cabinet where no 12 V rail exists. Consumption is 0.5 W or less, so it can sit on a shared supply without derating.
The module is IP30 and rated for -20 °C to +70 °C, so it belongs indoors or inside an existing enclosure rather than on a mast. It is the cheapest way to bring one RS485 device — a meter, a controller, a sensor gateway — onto a TPUNB network.
