
Product
TP1110-MP20
44-pin LCC 470–510 MHz module, 17 dBm, -117 dBm sensitivity, 17.7 × 15.8 × 2.8 mm, selectable 2.4/19.2/76.8 kbps.
- Frequency
- 470–510 MHz
- TX power
- 17 dBm
- Sensitivity
- -117 dBm
- Package
- LCC SMT
Technical specifications
Radio
| Operating frequency | 470–510 MHz (configurable) |
|---|---|
| Transmit power | 17 dBm, configurable |
| Receiver sensitivity | -117 dBm |
| Modulation | FSK |
| Channel bandwidth | <200 kHz single carrier (configurable) |
| Air-interface data rate | 2.4 kbps/19.2 kbps/76.8 kbps |
| Antenna interface | IPEX Gen 1/castellated holes |
Hardware
| Supply voltage | 2.6 V – 3.6 V typical 3.3 V |
|---|---|
| Interfaces | AT UART: TTL level, 115200 bps; 2. RST; 3. SWD debug/programming |
| Current consumption (typical) | TX current 90 [email protected] V 470 MHz; RX current 12 [email protected] V 470 MHz |
| Operating temperature | -40 °C to +85 °C |
| Storage temperature | -40 °C to +90 °C |
| Dimensions | 17.7 × 15.8 × 2.8 mm |
| Pin count | 44 |
| Package | LCC SMT |
Overview
The TP1110-MP20 puts the TP1110 radio into a 44-pin LCC SMT package of 17.7 × 15.8 × 2.8 mm — slightly thicker than the TP1107 outline — with 470–510 MHz coverage, 17 dBm output and -117 dBm sensitivity.
Symbol rate is selectable between 2.4, 19.2 and 76.8 kbps, so one part covers long-range/low-rate and shorter high-rate links. Supply is 2.6–3.6 V with 3.3 V typical; the AT UART runs at 9600 bps alongside a 115200 bps debug UART, with RI, wake-up, RST_OUT, LED and SWD exposed.
It is the drop-in option for boards already laid out for the 17.7 × 15.8 mm footprint that need the TP1110 feature set.
