
Product
TP1110-MK20
7-pin through-hole 470–510 MHz module, 17 dBm, -117 dBm sensitivity, 2.6–5.5 V supply, 21 × 48.5 mm.
- Frequency
- 470–510 MHz
- TX power
- 17 dBm
- Sensitivity
- -117 dBm
- Package
- through-hole
Technical specifications
Radio
| Operating frequency | 470–510 MHz (configurable) |
|---|---|
| Transmit power | 17 dBm, configurable |
| Receiver sensitivity | -117 dBm |
| Modulation | FSK |
| Channel bandwidth | <200 kHz single carrier (configurable) |
| Downlink symbol rate | 19.2 kbps/76.8 kbps |
| Uplink symbol rate | 2.4 kbps/76.8 kbps |
| Antenna interface | SMA-K |
Hardware
| Supply voltage | 2.6 V – 5.5 V typical 5 V |
|---|---|
| Interfaces | AT UART: TTL level, 115200 bps; 2. RST; 3. SWD debug/programming |
| Current consumption (typical) | TX current 90 mA@5 V 470 MHz; RX current 12 mA@5 V 470 MHz |
| Operating temperature | -40 °C to +85 °C |
| Storage temperature | -40 °C to +90 °C |
| Dimensions | 21 mm × 48.5(36+12.5)mm |
| Pin count | 7 |
| Package | through-hole |
Overview
The TP1110-MK20 is a through-hole variant built on the TP1110 radio: 470–510 MHz, 17 dBm configurable output, -117 dBm sensitivity, and a 2.6–5.5 V supply window with 5 V typical.
Seven pins in a 21 × 48.5 mm outline carry the AT UART at 9600 bps, a 115200 bps debug UART, and the RI, wake-up, RST_OUT, LED and SWD signals. No reflow is required.
It fits bench prototypes, sample builds and repairs where an LCC part would have to be reflowed, while keeping the RF performance of the SMT module.
