Product

TP1209-MS22B001

Compact spread-spectrum module: 470–510 MHz, 17 dBm, -140 dBm at 12 kcps SF9, 17.8 × 22 × 2.5 mm, 44 pins.

Frequency
470–510 MHz
TX power
17 dBm
Sensitivity
-140 dBm
Package
LCC SMT

Request datasheet & pricing →

Technical specifications

Radio

TP1209-MS22B001 Radio specifications
Operating frequency470–510 MHz (configurable)
Transmit power17 dBm, configurable
Receiver sensitivity-140 dBm(12kcps, SF9)
ModulationS-FSK
Channel bandwidth<200 kHz single carrier
Air-interface data rate12Kcps/24Kcps/48Kcps/100Kcps
Antenna interfaceLCC pad
Supply voltage2.6 V – 3.6 V typical 3.3 V

Hardware

TP1209-MS22B001 Hardware specifications
InterfacesSupply pin, typical 3.3 V; AT UART: TTL level, 115200 bps; debug UART: TTL level, 115200 bps; network-status LED; SWD debug/programming; UNBantennaport, 50 Ω characteristic impedance; RI signal (reserved); WAKE signal
Current consumptionTX current 200 [email protected] V 470 MHz; RX current 60 [email protected] V 470 MHz; sleep power 4 uA–6 [email protected] V
Operating temperature-40 °C to +85 °C
Storage temperature-40 °C to +90 °C
Dimensions17.8 mm × 22 mm × 2.5 mm
Pin count44
PackageLCC SMT

Overview

The TP1209-MS22B001 is a variant of the MS22 outline with the same spread-spectrum FSK radio: 470–510 MHz, 17 dBm configurable output and -140 dBm sensitivity at 12 kcps (SF9).

It is a 44-pin LCC SMT module measuring 17.8 × 22 × 2.5 mm, running from 2.6–3.6 V (3.3 V typical). Chip rates of 12, 24, 48 and 100 kcps are selectable; the AT UART runs at 9600 bps alongside a 115200 bps debug UART, with RI, wake-up, RST_OUT, LED and SWD exposed.

The B001 suffix marks a build variant of the same footprint, so it is normally selected by an existing BOM rather than by a difference in radio performance — check the ordering code against the schematic before substituting.