
Product
TP5500
TPUNB terminal DTU, 470–510 MHz, 26 dBm, RS485 + RS232, IP65 outdoor housing, 5–28 V supply.
- Frequency
- 470–510 MHz
- TX power
- 26 ± 1 dBm
- Sensitivity
- -116 dBm @19.2 kbps, 470 MHz
- Package
- 116 × 85 × 41 mm
Technical specifications
Radio
| Operating frequency | 470–510 MHz |
|---|---|
| Channel bandwidth | ≤200 kHz per carrier |
| Symbol rate | 2.4 kbps / 19.2 kbps / 76.8 kbps |
| Transmit power | 26 ± 1 dBm |
| Channels | 1 |
| Receiver sensitivity | -116 dBm @19.2 kbps, 470 MHz |
| Operating modes | Bidirectional transparent, unidirectional receive, unidirectional transmit |
Hardware
| Interfaces | RS485 ×1; RS232 ×1; DC 12 V input ×1; TPUNB SMA female ×1; magnetic mode switch ×1 |
|---|---|
| Supply voltage | DC 12 V (5–28 V wide range) |
| Power consumption | ≤1 W |
| Dimensions | 116 × 85 × 41 mm |
| Weight | <0.25 kg |
| Mounting | Wall mount or DN35 DIN rail |
| Protection class | IP65 |
| Installation | Outdoor |
Environmental
| Operating temperature | -40 °C to +70 °C |
|---|---|
| Storage temperature | -40 °C to +85 °C |
| ESD immunity | Air discharge ±15 kV, contact discharge ±10 kV |
Overview
The TP5500 is a TPUNB terminal DTU built for outdoor installations: it takes RS485 or RS232 data on the wired side and carries it over a TPUNB narrowband link in the 470–510 MHz band. Transmit power is 26 ± 1 dBm with a receiver sensitivity of -116 dBm at 19.2 kbps, and the link supports 2.4, 19.2 and 76.8 kbps symbol rates.
It runs in three modes: bidirectional transparent forwarding (the default), unidirectional receive into the serial port, and unidirectional transmit from the serial port. Both serial ports are available at once, and the mode is switched with a magnetic button so the housing stays closed in the field. Supply is DC 12 V with a 5–28 V range, drawing 1 W or less.
The enclosure is 116 × 85 × 41 mm and rated IP65 for outdoor mounting on a wall or a DN35 DIN rail, with an operating range of -40 °C to +70 °C and ESD immunity of ±15 kV air / ±10 kV contact. It suits metering, monitoring and industrial control points where a serial device needs to reach a TPUNB base station without cabling.
