Product

TP5510

TPUNB gateway DTU concentrator, 470–510 MHz, 26 dBm, up to 100 terminals, broadcast and directed transmission, IP65.

Frequency
470–510 MHz
TX power
26 ± 1 dBm
Sensitivity
-116 dBm @19.2 kbps, 470 MHz
Package
116 × 85 × 41 mm

Request datasheet & pricing →

Technical specifications

Radio

TP5510 Radio specifications
Operating frequency470–510 MHz
Channel bandwidth≤200 kHz per carrier
Symbol rate2.4 kbps / 19.2 kbps / 76.8 kbps
Transmit power26 ± 1 dBm
Channels1
Receiver sensitivity-116 dBm @19.2 kbps, 470 MHz
Terminal capacityUp to 100 terminals
Operating modesBroadcast and directed (unicast) transmission

Hardware

TP5510 Hardware specifications
InterfacesRS485 ×1; RS232 ×1; DC 12 V input ×1; TPUNB SMA female ×1; magnetic mode switch ×1
Supply voltageDC 12 V (5–28 V wide range)
Power consumption≤1 W, average around 0.25 W
Dimensions116 × 85 × 41 mm
Weight<0.25 kg
MountingWall mount or DN35 DIN rail
Protection classIP65
InstallationOutdoor

Environmental

TP5510 Environmental specifications
Operating temperature-40 °C to +70 °C
Storage temperature-40 °C to +85 °C
ESD immunityAir discharge ±15 kV, contact discharge ±10 kV

Overview

The TP5510 is the concentrator side of the same TPUNB platform as the TP5500: RS232 or RS485 on the wired side, TPUNB in the 470–510 MHz band, 26 ± 1 dBm transmit power and -116 dBm sensitivity at 19.2 kbps. It holds one TPUNB network of up to 100 terminals.

Data can be broadcast to every terminal in the network or addressed to a single terminal, and the gateway keeps a whitelist of terminals allowed to communicate with it — entries are added and removed from the wired side. Configuration and firmware updates come through the same serial interface.

The housing, supply and environmental ratings match the TP5500 — 116 × 85 × 41 mm, IP65, DC 12 V with a 5–28 V range, average draw around 0.25 W, -40 °C to +70 °C — so the pair can be mounted on the same pole or DIN rail and left unserviced. It is the box that turns a site full of serial meters into one TPUNB network.