Product

TP5618-FD13L20

Sub-1 GHz image and data link with RJ45 and Type-C, IEEE 802.11ah, 1–8 MHz channels, 32.5 Mbps, 80 × 80 × 30 mm.

Frequency
Sub-1 GHz, 900 MHz antenna
Sensitivity
-105 dBm
Package
80 × 80 × 30 mm

Request datasheet & pricing →

Technical specifications

Radio

TP5618-FD13L20 Radio specifications
Operating frequencySub-1 GHz, 900 MHz antenna
StandardIEEE 802.11ah
Channel width1 / 2 / 4 / 8 MHz
Air-interface data rate32.5 Mbps (8 MHz, MCS7)
Receiver sensitivity-105 dBm (1 MHz PPDU, MCS10)
Operating modesAP and STA (relay, roaming and multicast supported)

Hardware

TP5618-FD13L20 Hardware specifications
InterfacesRJ45 Ethernet; Type-C (power, data, configuration); DC-005 12 V power jack; SMA female antenna
Supply voltageDC 5 V (Type-C) / DC 12 V
Current consumption50 mA at 12 V
Dimensions80 × 80 × 30 mm

Environmental

TP5618-FD13L20 Environmental specifications
Operating temperature-20 °C to +70 °C
Storage temperature-20 °C to +70 °C

Overview

The TP5618-FD13L20 is the same IEEE 802.11ah radio as the TP5608 in a box aimed at off-the-shelf equipment: RJ45 for video, Type-C for power, configuration and serial data, and a DC-005 jack for 12 V. Channel widths of 1, 2, 4 and 8 MHz, 32.5 Mbps at 8 MHz MCS7 and -105 dBm at 1 MHz MCS10 put it in the same performance class.

Because the video port is a standard RJ45, a camera or NVR needs no adapter — one device at each end, one in AP mode and one in STA, and the Ethernet segment is bridged over sub-1 GHz. The pairing button and mode switch are on the housing; the antenna is a 900 MHz SMA whip.

The enclosure is 80 × 80 × 30 mm and rated -20 °C to +70 °C, drawing 50 mA at 12 V. It suits fixed camera positions, gate stations and portable surveillance kits where 2.4 GHz Wi-Fi coverage is crowded or out of range.