
Product
TP1501
44-pin LCC module, 470–510 MHz, spread-spectrum FSK, 17 dBm, -117 dBm sensitivity, 2.4/19.2/76.8 kbps.
- Frequency
- 470–510 MHz
- TX power
- 17 dBm
- Sensitivity
- -117 dBm
- Package
- LCC SMT
Technical specifications
Radio
| Operating frequency | 470–510 MHz (configurable) |
|---|---|
| Transmit power | 17 dBm, transmit power configurable |
| Receiver sensitivity | -117 dBm |
| Modulation | S-FSK (spread-spectrum FSK) |
| Channel bandwidth | <200 kHz single carrier (configurable) |
| Over-the-air data rate | 2.4 kbps/19.2 kbps/76.8 kbps |
| Antenna interface | LCC pad |
Hardware
| Supply voltage | 2.6 V – 3.6 V typical 3.3 V |
|---|---|
| Interfaces | 1. AT UART: TTL level, 9600 bps 2. debug UART: TTL level, 115200 bps 3. RI signal; 4. wake-up input 5. RST_OUT 6. network-status LED 7. SWD debug/programming |
| Current consumption (typical) | TX current 85.5 [email protected] V 470 MHz; RX current 16.5 [email protected] V 470 MHz; sleep current 2.2 [email protected] V RTC enabled |
| Operating temperature | -40 °C to +85 °C |
| Storage temperature | -40 °C to +90 °C |
| Dimensions | 17.7(±0.15 mm) × 15.8(±0.15 mm) × 2.0 mm(±0.2 mm) |
| Pin count | 44 |
| Package | LCC SMT |
Overview
The TP1501 uses spread-spectrum FSK on 470–510 MHz with 17 dBm configurable output, -117 dBm sensitivity and selectable rates of 2.4, 19.2 and 76.8 kbps.
It is a 44-pin LCC SMT module in the 17.7 × 15.8 × 2.0 mm outline, running from 2.6–3.6 V with 3.3 V typical. The AT UART sits at 9600 bps with a 115200 bps debug UART, and RI, wake-up, RST_OUT, LED and SWD are brought out.
It suits designs that want spread-spectrum signalling but keep the -117 dBm sensitivity and small footprint of the standard FSK modules, with a three-rate ladder for trade-offs between range and payload.
