Product

TP1506-MS22

MS22-outline spread-spectrum module, 470–510 MHz, 17 dBm, -140 dBm at 12 kcps, 17.8 × 22 × 2.5 mm.

Frequency
470–510 MHz
TX power
17 dBm
Sensitivity
-140 dBm
Package
LCC SMT

Request datasheet & pricing →

Technical specifications

Radio

TP1506-MS22 Radio specifications
Operating frequency470–510 MHz (configurable)
Transmit power17 dBm, configurable
Receiver sensitivity-140 dBm(12kcps, SF9)
ModulationS-FSK
Channel bandwidth<200 kHz single carrier
Air-interface data rate12Kcps/24Kcps/48Kcps/100Kcps
Antenna interfaceLCC pad
Supply voltage2.6 V – 3.6 V typical 3.3 V

Hardware

TP1506-MS22 Hardware specifications
InterfacesSupply pin, typical 3.3 V; AT UART: TTL level, 115200 bps; 3. debug UART: TTL level, 115200 bps; 4. network-status LED; 5. SWD debug/programming; 6. UNBantennaport, 50 Ω characteristic impedance.
Current consumption (typical)TX current 200 [email protected] V 470 MHz; RX current 60 [email protected] V 470 MHz
Operating temperature-40 °C to +85 °C
Storage temperature-40 °C to +90 °C
Dimensions17.8 mm × 22 mm × 2.5 mm
Pin count44
PackageLCC SMT

Overview

The TP1506-MS22 combines the MS22 17.8 × 22 × 2.5 mm outline with spread-spectrum FSK on 470–510 MHz, 17 dBm configurable output and -140 dBm sensitivity at 12 kcps (SF9).

Supply is 2.6–3.6 V with 3.3 V typical, and 44 pins are available: an AT UART at 9600 bps, a 115200 bps debug UART, plus RI, wake-up, RST_OUT, LED and SWD. Selectable chip rates are 12, 24, 48 and 100 kcps.

It is the TP1500-series member for designs that need the highest link margin in the MS22 footprint, and can share a board with TP1209-MS22 or TP1211-MS22 where the same layout has to serve several tiers.