Product

TP2503-M1

Compact TPUNB terminal module, 17.7 × 15.8 mm: 470–510 MHz S-FSK, 17 dBm transmit, −111.5 dBm sensitivity and a single 19.2 kbps air rate.

Frequency
470–510 MHz, configurable
TX power
17 dBm
Sensitivity
−111.5 dBm
Package
LCC SMD

Request datasheet & pricing →

Technical specifications

Product

TP2503-M1 Product specifications
TypeTPUNB terminal module
Form factor44-pin LCC

Radio

TP2503-M1 Radio specifications
ModulationS-FSK (spread FSK)
Operating frequency470–510 MHz, configurable
Channel bandwidth<200 kHz per carrier
Symbol rate19.2 kbps
Transmit power17 dBm, configurable
Receiver sensitivity−111.5 dBm
AntennaLCC pad

Hardware

TP2503-M1 Hardware specifications
Supply voltage3.1–3.6 V, 3.3 V recommended
Transmit current≤130 mA @3.3 V
Receive current≤30 mA @3.3 V

Interfaces

TP2503-M1 Interfaces specifications
AT serialTTL, 115200 bps
Debug serialTTL, 115200 bps
StatusLED network indicator

Mechanical

TP2503-M1 Mechanical specifications
Dimensions17.7 × 15.8 × 2.0 mm
Pin count44
PackageLCC SMD

Environment

TP2503-M1 Environment specifications
Operating temperature−40 to 85 °C
Storage temperature−40 to 90 °C

Overview

TP2503-M1 is the terminal-side module: 17.7 × 15.8 × 2.0 mm on 44 LCC pads, with a single air rate of 19.2 kbps. It is the part that goes into a meter, a sensor or a handheld to put that device on a TPUNB network, as distinct from the gateway modules that collect from such devices.

At 3.3 V it draws up to 130 mA in transmit and 30 mA in receive, low enough to run from a lithium cell or a small DC-DC in a battery-powered device. Output power and sensitivity are 17 dBm and −111.5 dBm, both configurable over the AT serial port at 115200 bps; a second UART serves debug and an LED pin reports network state.

The antenna is fed from an LCC pad rather than a connector, so the host PCB carries the matching network and the radiator — the usual arrangement when the radio has to sit inside a sealed enclosure. Operating range is −40 to 85 °C.