Product

TP2210-MP36

Long-range TPUNB gateway module in the same 18-pin LCC package: −120 dBm receiver, 17 dBm transmit, 19.2 / 76.8 kbps and a 5.5 V supply drawing 1.9 A in transmit.

Frequency
470–510 MHz, configurable
TX power
17 dBm
Sensitivity
−120 dBm
Package
LCC SMT

Request datasheet & pricing →

Technical specifications

Product

TP2210-MP36 Product specifications
TypeTPUNB gateway module
Form factor18-pin LCC, high sensitivity

Radio

TP2210-MP36 Radio specifications
ModulationFSK
Operating frequency470–510 MHz, configurable
Channel bandwidth≤200 kHz per carrier
Symbol rate19.2 / 76.8 kbps
Transmit power17 dBm, configurable
Receiver sensitivity−120 dBm
AntennaLCC pad or IPEX connector

Hardware

TP2210-MP36 Hardware specifications
Supply voltage5.0–6.0 V, 5.5 V typical
Transmit current1900 mA @5.5 V
Receive current55 mA @5.5 V
Auxiliary output3.3 V rail for host use

Interfaces

TP2210-MP36 Interfaces specifications
AT serialTTL 3.3 V, 115200 bps default
Debug serialTTL 3.3 V, 115200 bps
ProgrammingSWD (SWCLK / SWDIO)
StatusLED drive pin
Control pinsWAKE (active high), NRST (active low, 5 ms)

Mechanical

TP2210-MP36 Mechanical specifications
Dimensions40.5 × 25 × 4.4 mm
Pin count18
PackageLCC SMT

Environment

TP2210-MP36 Environment specifications
Operating temperature−40 to 70 °C
Storage temperature−40 to 90 °C

Overview

TP2210-MP36 is the long-range variant of the MP30: identical 40.5 × 25 × 4.4 mm 18-pad LCC package and the same 17 dBm transmitter, but a receiver specified at −120 dBm instead of −117 dBm, with the symbol rate restricted to 19.2 and 76.8 kbps. Three decibels of added sensitivity is about 40 % more range in free space at the same output power, or the same reach with more margin on a noisy site.

The cost is current. Transmit draw is 1900 mA at 5.5 V against 990 mA for the MP30, because the radio is driven harder, so the host rail and the copper feeding it have to be sized for a 2 A pulse; the 55 mA receive figure describes only the idle half of the duty cycle.

Supply range is 5.0–6.0 V with 5.5 V typical, which suits a 5 V rail with headroom or a 6 V rail. Interfaces match the MP30 — AT UART at 115200 bps, debug UART, LED status, SWD, active-low NRST, and a 3.3 V auxiliary output. Operating temperature is −40 to 70 °C.