Product

TPF25D-01-U1

Zigbee module on the Silicon Labs EFR32MG21: ARM Cortex-M33 at 80 MHz, 1024 kB flash, 96 kB RAM, 19.9 dBm output and a 19.3 × 13.6 mm footprint that matches Digi XBee 3 sockets.

TX power
19.9 dBm typical
Sensitivity
−104.9 dBm at 125 kbps GFSK
Package
SMD, stamp-hole pads

Request datasheet & pricing →

Technical specifications

Product

TPF25D-01-U1 Product specifications
TypeZigbee module
Form factor19.3 × 13.6 × 2.3 mm SMD, Digi XBee 3 footprint

Radio

TPF25D-01-U1 Radio specifications
ProtocolZigbee, 2.4 GHz
ChipsetSilicon Labs EFR32MG21A020F1024IM32-B
Core32-bit ARM Cortex-M33 at 80 MHz
Memory1024 kB flash, 96 kB RAM
Frequency2400–2483.5 MHz
Transmit power19.9 dBm typical (19.7–20.2 dBm), 100 mW
Receiver sensitivity−104.9 dBm at 125 kbps GFSK
AntennaU.FL connector or stamp-hole pad, U.FL fitted by default

Power

TPF25D-01-U1 Power specifications
Transmit current170 mA at 20 dBm
Receive current8.8 mA
Sleep current4.5 µA in EM2 deep sleep, 16 kB RAM retained, RTC on LFRCO
Supply voltage1.71–3.8 V, 3.0 V typical
Absolute maximum−0.3 to 3.8 V on VCC and interface pins

Interfaces

TPF25D-01-U1 Interfaces specifications
SerialUART (TXD / RXD)
Control pinsRST (active low), SLEEP_RQ wake (active low)
Status pinsSTATUS (awake), ASSOCIATE (joined)
DebugSWD (SWCLK / SWDIO) with J-Link
Pin count34

Mechanical

TPF25D-01-U1 Mechanical specifications
Dimensions19.3 × 13.6 × 2.3 mm including shield
PackageSMD, stamp-hole pads

Environment

TPF25D-01-U1 Environment specifications
Operating temperature−40 to 85 °C
Storage temperature−40 to 125 °C

Hardware

TPF25D-01-U1 Hardware specifications
Crystal32.768 kHz integrated

Overview

TPF25D-01-U1 is a Zigbee module rather than a Wi-Fi one: the Silicon Labs EFR32MG21A020F1024IM32-B inside it carries a 32-bit ARM Cortex-M33 core at 80 MHz, 1024 kB of flash and 96 kB of RAM, all under a 19.3 × 13.6 mm shield.

The pinout follows Digi XBee 3, so a board already routed for that socket takes this module without a respin. The 34 stamp-hole pads carry UART, hardware reset, the SLEEP_RQ wake line, two status outputs and SWD for flashing.

Radio: 2400–2483.5 MHz with 19.9 dBm typical output (100 mW) and −104.9 dBm receive sensitivity at 125 kbps GFSK. The supply range is 1.71–3.8 V, and EM2 deep sleep draws 4.5 µA with 16 kB of RAM retained and the RTC on LFRCO — which is what keeps a Zigbee stack associated between reports. Transmit current is 170 mA at full power, receive 8.8 mA.

Typical use: lighting and connected luminaires, home security panels, smart-home gateways, industrial sensors, wireless alarm systems, building automation, industrial remote controls and medical devices.