
Product
TP1107-MP30-L
18-pin LCC module, 470–510 MHz, 17 dBm, -117 dBm at 2.4 kbps, 5–6 V supply, 40.5 × 25 × 4.4 mm.
- Frequency
- 470–510 MHz
- TX power
- 17 dBm
- Sensitivity
- -117 [email protected] -111 [email protected] -106 [email protected]
- Package
- LCC SMT
Technical specifications
Radio
| Operating frequency | 470–510 MHz |
|---|---|
| Receiver sensitivity | -117 [email protected] -111 [email protected] -106 [email protected] |
| Modulation | FSK |
| Transmit power | 17 dBm, transmit power configurable |
| Channel bandwidth | <200 kHz single carrier (configurable) |
| Air-interface data rate | 2.4 kbps/19.2 kbps/76.8 kbps |
| Antenna interface | LCC pad/IPEX |
Hardware
| Supply voltage | 5.0 V – 6.0 V typical 5.0 V |
|---|---|
| Interfaces | 1. AT UART: TTL level 2. debug UART: TTL level 3. RI signal; 4. wake-up input; 5. network-status LED; 6. SWD debug/programming |
| Current consumption (typical) | TX current 650 mA@5 V; RX current 20 mA@5 V; sleep current 6 uA@5 V |
| Operating temperature | -40 °C to +70 °C |
| Storage temperature | -40 °C to +90 °C |
| Dimensions | 40.5 × 25 × 4.4 mm |
| Pin count | 18 |
| Package | LCC SMT |
Overview
The TP1107-MP30-L is the higher-power-rail variant of TP1107 in an 18-pin LCC package of 40.5 × 25 × 4.4 mm. It covers 470–510 MHz with 17 dBm configurable output and gives -117 dBm at 2.4 kbps, -111 dBm at 19.2 kbps and -106 dBm at 76.8 kbps — sensitivity that improves as the symbol rate drops.
It runs from 5.0–6.0 V (5.0 V typical), which makes it a direct drop-in for equipment with an existing 5 V bus. The AT UART and debug UART run at 9600 and 115200 bps with RI, wake-up, RST_OUT, LED and SWD available.
The larger board area and 18 pins give room for a proper ground plane and antenna keep-out, so it is the usual choice for fixed installations such as meters and industrial controllers.
