
Product
TP1107-MK20
Through-hole 470–510 MHz module with 7 pins, 17 dBm output, -117 dBm sensitivity and 2.6–5.5 V supply.
- Frequency
- 470–510 MHz
- TX power
- 17 dBm
- Sensitivity
- -117 dBm
- Package
- through-hole
Technical specifications
Radio
| Operating frequency | 470–510 MHz (configurable) |
|---|---|
| Transmit power | 17 dBm, configurable |
| Receiver sensitivity | -117 dBm |
| Modulation | FSK |
| Channel bandwidth | <200 kHz single carrier (configurable) |
| Downlink symbol rate | 19.2 kbps/76.8 kbps |
| Uplink symbol rate | 2.4 kbps/76.8 kbps |
| Antenna interface | SMA-K |
Hardware
| Supply voltage | 2.6 V – 5.5 V typical 5 V |
|---|---|
| Interfaces | 1. AT UART: TTL level, 9600 bps; 2. debug UART: TTL level, 115200 bps; 3. RI signal; 4. wake-up input; 5. RST; 6. SWD debug/programming |
| Current consumption (typical) | TX current 98 mA@5 V 470 MHz; RX current 16.5 mA@5 V 470 MHz; sleep current 3 uA@5 V RTC enabled |
| Operating temperature | -25 °C to +85 °C |
| Storage temperature | -40 °C to +90 °C |
| Dimensions | 21 mm × 48.5(36+12.5)mm |
| Pin count | 7 |
| Package | through-hole |
Overview
The TP1107-MK20 packages the TP1107 radio as a 7-pin through-hole module measuring 21 × 48.5 mm, aimed at boards that are hand-soldered or built in low volume. It keeps the 470–510 MHz band, 17 dBm configurable output and -117 dBm sensitivity of the SMT version.
The wider supply window of 2.6–5.5 V (5 V typical) lets it run directly from a 5 V rail or a battery pack without an extra regulator. Host connection is an AT UART at 9600 bps plus a 115200 bps debug UART, with RI, wake-up, RST_OUT, LED and SWD signals on the pin header.
It suits retrofit work, prototype rigs and equipment where reflow of an LCC part is impractical but the RF behaviour of TP1107 is already proven.
