Product

TP2210-MP30

Surface-mount TPUNB gateway module, 40.5 × 25 mm: 470–510 MHz, 17 dBm, −117 dBm sensitivity, 5–6 V supply with 990 mA transmit current, LCC pad or IPEX antenna.

Frequency
470–510 MHz, configurable
TX power
17 dBm
Sensitivity
−117 dBm
Package
LCC SMT

Request datasheet & pricing →

Technical specifications

Product

TP2210-MP30 Product specifications
TypeTPUNB gateway module
Form factor18-pin LCC

Radio

TP2210-MP30 Radio specifications
ModulationFSK
Operating frequency470–510 MHz, configurable
Channel bandwidth≤200 kHz per carrier
Symbol rate2.4 / 19.2 / 76.8 kbps
Transmit power17 dBm, configurable
Receiver sensitivity−117 dBm
AntennaLCC pad or IPEX connector

Hardware

TP2210-MP30 Hardware specifications
Supply voltage5.0–6.0 V, 5.0 V typical
Transmit current990 mA @5 V
Receive current55 mA @5 V
Auxiliary output3.3 V rail for host use

Interfaces

TP2210-MP30 Interfaces specifications
AT serialTTL 3.3 V, 115200 bps default
Debug serialTTL 3.3 V, 115200 bps
ProgrammingSWD (SWCLK / SWDIO)
StatusLED drive pin
Control pinsWAKE, NRST (active low, 5 ms)

Mechanical

TP2210-MP30 Mechanical specifications
Dimensions40.5 × 25 × 4.4 mm
Pin count18
PackageLCC SMT

Environment

TP2210-MP30 Environment specifications
Operating temperature−40 to 70 °C
Storage temperature−40 to 90 °C

Overview

TP2210-MP30 is the surface-mount gateway module: 18 LCC pads on a 40.5 × 25 × 4.4 mm package, reflow-soldered onto the host board. The antenna leaves either through an LCC pad or through an IPEX connector, so one part serves both a compact design with a printed antenna and a design that needs an external one.

It runs from 5.0–6.0 V, typically 5 V, and draws 990 mA in transmit at 5 V against 55 mA in receive. That pulse is an order of magnitude above a terminal module and has to be designed into the host supply and its copper rather than averaged away; the module also provides a 3.3 V output the host can borrow for level shifting.

The radio covers 470–510 MHz with FSK modulation, ≤200 kHz per carrier and 2.4 / 19.2 / 76.8 kbps, at −117 dBm sensitivity. Control is a 115200 bps AT UART with a separate debug UART, an LED status pin, SWD and an active-low NRST. Operating temperature is −40 to 70 °C.