Product

TP2210-MK20

Through-hole TPUNB gateway module with an on-board SMA connector: 470–510 MHz, 17 dBm, −117 dBm sensitivity, 2.6–5.5 V supply and AT control at 115200 bps.

Frequency
470–510 MHz, configurable
TX power
17 dBm
Sensitivity
−117 dBm
Package
Through-hole DIP

Request datasheet & pricing →

Technical specifications

Product

TP2210-MK20 Product specifications
TypeTPUNB gateway module
Form factor7-pin DIP with SMA-K

Radio

TP2210-MK20 Radio specifications
ModulationFSK
Operating frequency470–510 MHz, configurable
Channel bandwidth≤200 kHz per carrier
Symbol rate2.4 / 19.2 / 76.8 kbps
Transmit power17 dBm, configurable
Receiver sensitivity−117 dBm
RF connectorSMA-K, nut and washer included

Hardware

TP2210-MK20 Hardware specifications
Supply voltage2.6–5.5 V, 5 V typical
Peak supply current120 mA
Transmit current98 mA @5 V, 470 MHz
Receive current16.5 mA @5 V, 470 MHz

Interfaces

TP2210-MK20 Interfaces specifications
AT serialTTL 3.3 V, 115200 bps default
Debug serialTTL 3.3 V, 115200 bps, 2.54 mm header
ProgrammingSWD
Control pinsWAKE, RST (active low, 5 ms), RI

Mechanical

TP2210-MK20 Mechanical specifications
Dimensions21 × 48.5 mm (36 mm body + 12.5 mm antenna tab)
Pin count7 signal pins, 3 mounting holes
PackageThrough-hole DIP

Environment

TP2210-MK20 Environment specifications
Operating temperature−25 to 85 °C
Storage temperature−40 to 85 °C
Moisture levelMSL 3, vacuum-sealed shipment

Overview

TP2210-MK20 is the through-hole gateway module: seven signal pins, an SMA-K connector soldered to the board, and a 21 × 48.5 mm footprint that fits a hand-built prototype as readily as a production board. Because the antenna screws directly onto the module, no pigtail or external matching network is needed.

The supply range of 2.6–5.5 V means the module runs from a 3.3 V rail or a 5 V rail without a converter; peak current is 120 mA, with 98 mA in transmit at 470 MHz and 16.5 mA in receive. AT commands over a 115200 bps UART set frequency, output power and network parameters, and a second debug UART plus an SWD header are brought out for firmware work.

Its operating range is −25 to 85 °C, which covers indoor cabinets and sheltered outdoor enclosures but not the −40 °C rating of the MP30 and MP36 modules. Radio performance is 17 dBm transmit and −117 dBm sensitivity at 2.4, 19.2 or 76.8 kbps.